Home / Development Boards / Single Board Computer | NanoPi A64 ARM Development Board NanoPi A64 Single Board Computer 64-bit Powered SBC for Open Source Projects

Single Board Computer | NanoPi A64 ARM Development Board NanoPi A64 Single Board Computer 64-bit Powered SBC for Open Source Projects

Product Introduction

The NanoPi A64 single board computer (SBC) is a high performance, cost-effective hardware platform designed by FriendlyARM Team. It adopts AllWinner A64 SoC (Quad-core ARM® Cortex™-A53 64-Bit CPU and Mali400MP2 GPU) with 1GB DDR3 and 8GB Flash. With a small size with dimensions of 64 x 60 mm this board comes with a wide selection of interfaces, ports and features. It comes with 1 Gbps Ethernet, IR receiver, Video/Audio input and output. On-board AXP803 PMU and WiFi. It takes the power input from its Micro USB port. It also has MIPI-DSI and DVP interfaces, GPIO pin-header compatible with Raspberry Pi and a serial debug port, making this board a great pick for DIY Projects and open source hobbyists.

NanoPi A64 currently supports few Linux distributions, images such as Ubuntu Mate and Ubuntu-Core. FriendlyARM Company expected to support additional platforms as product development evolves and advances. The A64 is currently available for sale in FriendlyARM Company store for a retail price of $25 including shipping and can be found on the link posted below:

Buy It from FriendlyARM

NanoPi A64 3D printed housing

 

NanoPi A64 Single Board Computer Interfaces

 

NanoPi A64 | Back View

 

NanoPi A64 Specification

  • CPU: Allwinner A64, Quad-core [email protected] to 1.152GHz, DVFS
  • GPU: Mali400MP2, Supports OpenGL ES2.0, OpenVG1.1
  • DDR3 RAM: 1GB
  • Ethernet: One Gigabit Ethernet (RTL8211E)
  • PMU Power Management: AXP803, support software power-off
  • WiFi: 802.11 b/g/n
  • Audio Out/MIC: 3.5 mm audio jack
  • IR Receiver: On-board IR receiver
  • USB 2.0 Type A x 2
  • Power Button x 1
  • Serial Debug Port: 2.54 mm pitch 4pin-header
  • Micro SD Slot x 1
  • Micro USB x 1: only for power input
  • DVP Camera: 0.5 mm pitch 24 pin FPC seat
  • Video Out: 1.4 HDMI Type-A
  • LED: x1 Power Indication ,  1x System LED
  • MIPI DSI: 0.5mm pitch 30pin FPC seat
  • GPIO: 2.54mm pitch 40pin-header, Compatible with Raspberry Pi’s GPIO: UART, SPI, I2C, PWM, IO etc
    I2S: 7pin, 2.54mm pitch
  • PCB : Six layer, ENIG
  • Dimension: 64 x 60 mm
  • Power: DC 5V/2A
  • OS: Ubuntu-Core with QtE, Ubuntu-MATE

 

About androidpimp

Check Also

NanoPi K2 Board

NanoPi K2 Single Board Computer Review | Raspberry Pi 3 Competitor FirendlyElEC NanoPi K2 Amlogic S905 Powered Development Board for just $40

Product Introduction  The NanoPi K2 single board computer is FriendlyELEC (formally FirendlyARM) recent launched board, …