NanoPi M2 Review: Low Cost Raspberry Pi 3 Alternative
Home / Development Boards / NanoPi M2 Review: Low Cost Raspberry Pi 3 Alternative

NanoPi M2 Review: Low Cost Raspberry Pi 3 Alternative

Product Summery

The NanoPi M2 is another Samsung 4418 based ARM board released by FriendlyARM after the NanoPi 2 and NanoPi 2 Fire. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu Core, Ubuntu Mate, Debian, Android 5.1 and etc.

Compared to the Raspberry Pi 2 the NanoPi M2 uses the Samsung Cortex-A9 S5P4418 Soc. It integrates Gbps Ethernet, AXP228 PMU which supports software power-on/off and wake up functions. It can be powered via the MicroUSB port

In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, 3.5mm audio jack, onboard microphone, four USB hosts and Gbit Ethernet it has a Raspberry Pi compatible 40 pin GPIO pin header and various video interfaces such as a DVP camera interface, an LCD interface which supports I2C capacitive LCD and etc. In addition, for user’s convenience it has a serial debug port for debugging and development.

Buy It on FriendlyARM.COM

NanoPi-M2-Board-Layout

NanoPi-M2-Board-Back

 

NanoPi M2 Specif actions:

  • SoC: S5P4418, 400Mhz~1.4GHz
  • DDR3 RAM: 32bit 1GB DDR3
  • 1x Micro SD Slot
  • RTC: RTC Pins
  • Connectivity: Gbps Ethernet port(RTL8211E)
  • Audio: 3.5 mm audio jack/Via HDMI
  • Microphone: 1 x on-board Microphone
  • 2.54 mm pitch pin headers
  • Micro USB: 1 x USB 2.0 Client
  • HDMI: HDMI 1.4A, Type-A, 1080P60
  • Debug Serial Port: 4Pin 2.54 mm pitch pin header
  • User Key: 1 x Power , 1 x Reset
  • LED: 1 x Power LED, 1 x System LED
  • Power: DC 5V/2A
  • PCB Dimension(mm): 64 x 56, Six Layer
  • OS/Software: u-boot, Android 5.1, Debian Jessie 8
  • USB Host: 4 x USB 2.0 Host, two are standard type A ports and the other two are
  • LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
  • DVP Camera Interface: 0.5 mm pitch FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
  • PMU Power Management Unit: AXP228, support software power-off, sleep functions.
  • GPIO1: 2.54 mm pitch 40 pin, compatible with Raspberry Pi’s GPIO. It includes UART, SPI, I2C, PWM, IO etc

 

 

 

 

Download Sources:

 

friendlyarm_contact

About androidpimp

Check Also

NanoPi S2 Single Board Computer Powered with Samsung S5P4418 FriendlyARM NanoPi S2, A $45 Development Board for Open Source Projects

Product Introduction The NanoPi S2 is a single board computer designed and developed by FriendlyElec for …