Orange Pi Plus2 SET5 Development Kit: Raspberry Pi 3 Alternative
Warning: A non-numeric value encountered in /home/androi85/public_html/wp-content/themes/publisher/includes/func-review-rating.php on line 212
Warning: A non-numeric value encountered in /home/androi85/public_html/wp-content/themes/publisher/includes/func-review-rating.php on line 213
Following the launch of the Orange Pi Plus2 single board computer. Shenzhen Xunlong company released the SET5 kit package containing three main items. The Orange Pi Plus2 board, 5V/2A DC Power Supply Unit and a high quality transparent acrylic case.
The Pi Plus2 Board comes with good hardware specifications and software support, based on the H3 SoC from Allwinner. Equipped with a Quad core processor running at clock speed up to 1.3GHz, 2GB RAM (Shared with GPU), 16GB EMMC internal Flash, Gigabit Ethernet LAN port, Mali 400MP2 GPU, and on-board SATA 2.0 interface, making it a great Kit for DIY hobbyists, that love open source development or just for users interested in building a low cost NAS Server. The SET5 Package is currently sold at a retail price of $56 (excluding shipping fee) and can be found in Orange Pi official AliExpress store link listed below:
- Storage: 16GB eMMC.
- System Memory: 2GB DDR3 RAM.
- Built-in SATA 2.0 Interface (With SATA Chip Controller).
- All in one Package Containing Main Accessories (Excluding heat-sink).
- Allwinner H3 Quad Core Cortex-A7 Processor : Clock Speed up to 1.3 GHz (Peak).
- Connectivity: 10/100/1000M Ethernet, 802.11 b/g/n WiFi.
- Software: Android 4.4, Debian, Lubuntu, Raspbian, Ubuntu server, Armbian
- HDMI 1.4 : Video Output resolution: 4K @30fps (Maximum).
Orange Pi Plus2 Specifications
|CPU||H3 Quad-core Cortex-A7 H.265/HEVC 4K|
|GPU||Mali400MP2 GPU @600MHz|
Supports OpenGL ES 2.0
|Memory (SDRAM)||2GB DDR3 (shared with GPU)|
|On-board Network||10/100/1000M Ethernet RJ45|
|On-board WiFi||Realtek RTL8189ETV, IEEE 802.11 b/g/n|
|Audio Output||3.5 mm Jack and HDMI|
|Power Source||DC input can supply power, but USB OTG input don’t supply power|
|USB 2.0 Ports||Three USB 2.0 HOST, one USB 2.0 OTG|
|Buttons||Power Button(SW4), Recovery Button(SW3), Uboot Button(SW2)|
|Low-level peripherals||40 Pins Header,compatible with Raspberry Pi B+|
|GPIO (1×3) pin||UART, ground.|
|LED||Power led & Status led|
|Supported OS||Android, Ubuntu, Debian, Raspberry Pi Image|
|Product size||108 mm × 67 mm|