Author: androidpimp

FriendlyARM NanoPC T3 The NanoPC-T3 is a single-board computer designed and developed by FriendlyARM Company. It uses the Samsung Octa-Core Cortex-A53 S5P6818 SoC. Compared to the NanoPC-T2, the NanoPC-T3 is equipped with additional interfaces and ports, along with a more powerful SoC. Its dynamic frequency scales from 400MHz up to 1.4GHz. The NanoPC-T3 has an 8G eMMC on-board flash, audio jack, video input/output interfaces, built-in WiFi, Bluetooth, and a Gbps Ethernet port. In addition, the NanoPC-T3 has a power management chip, onboard porcelain antenna, and serial debug port. Other features include two camera interfaces: a DVP camera interface and a…

NanoPi S2 The NanoPi S2 is a single-board computer designed and developed by FriendlyElec for professionals, enterprise users, makers, and hobbyists. This small board is equipped with WiFi, Bluetooth, and 8GB eMMC. It uses the Samsung Quad Core Cortex-A9 S5P4418 SoC with dynamic frequency scaling up to 1.4 GHz. It has 1G DDR3 RAM, 802.11 b/g/n WiFi & Bluetooth 4.0 module. Its built power management unit uses the AXP228 chip which supports software shutdown. It takes power over the Micro USB port. It has a video input/output interface, 3.5 mm audio jack, USB port, and Micro SD card slot, serial debug port, and ADC pin-header.…

Product Introduction The NanoHat PCM5102A is an Audio Expansion board module designed by FriendlyARM Company, compatible with the NanoPi NEO Air / NanoPi NEO Development boards. It’s connected to the NEO Boards through the header pin interfaces. And comes with a IPCM5102A Audio Chip, Two RCA Stereo Audio Interfaces, on-board infrared receiver that allows it to be remotely controlled. That said, Music fans that want to build a low cost mini Hi-Fi audio system to stream music from the internet or play audio files stored locally on an external USB flash Drive can benefit from using this upgrade. For further…